Which Mounting Option will work for you?
Below you will find details of the options that are available for use with our Vision Poles. From here you can download the PDF instructions. If you need more advice, please call our expert team on 01832 734484.
Ground Socket
The Ground Socket is to be used for permanent displays. The Ground Socket is concreted into the ground, providing a secure ‘glove’ for the pole to sit in, thus increasing the safety and longevity of the pole preventing any damage to the base of the pole whilst keeping the pole vertical.
For more information on how to use this option, please click on the button below for instructions
If you wish to order the ground socket only, please click on the button below to add it to your basket
Wedge
Our strong and sturdy Wedge can be used in conjunction with any vehicle. The Wedge enables you to display a flag wherever you can park a car. It is simple to use providing a sturdy by temporary position for your flagpole. The spigot extends well into the pole providing a safe and stable display with no nuts and bolts around to damage the vehicle.
Our Wedge is constructed from 5mm steel, zinc coated to give a strong and professional finish to your display.
For more information on how to use this option, please click on the button below to view instructions.
If you wish to order the wedge only, please click on the button below to add it to your basket.
Wall Mounted Socket
The wall mounted socket can be used on most walls or fences, again it is making the most of existing structures, ideal for situations where digging foundations or using a ground level base solution is not option. Prior to installing any wall mounted flagstaff, we recommend that you seek advice regarding the suitability of where you intend to install and also the structural soundness of the surface in question. If you are installing a pole with a rotating arm, there must be adequate room for the arm to rotate freely without hitting any obstacles. The brackets are supplied without any bolts, these will depend on the structure the brackets are being installed on. The kit comes complete with a ground socket into which the pole is inserted, this prevents damage to your pole.
For more information on how to use this product, please click on the button below for instructions.
If you wish to order the Wall Socket Kit only, please click on the button below to add it to your basket.
D-Barrier Clamp
These clever Clamps have been specifically designed to be used on the D-barriers found around many sites. They enable you to make use of these existing structures providing permanent fixtures without the need for ground excavations. Easy to use and aesthetically pleasing, they provide increased on-site safety due to the strength of the steel brackets. They are used in conjunction with a ground socket which prevents damage to your flagpole.
You will need to know the diameter of your D-Barrier to order the correct gauge clamp. We stock the standard size of 76mm diameter, if the upright of your barrier or structure is wider than this, please contact our sales office who will be able to assist you with other non stock sizes.
TIP: Simply measure around the circumference of the upright on your barrier and divide by 3.14 to get the diameter.
For more information on how to use this product, please click on the button below for instructions.
If you wish to purchase the D-Barrier Clamp only, please click on the button below to add it to your basket
Event Baseplate
This clever Event Baseplate has been design for use on grass or soft areas. It is easy to use with no specialist equipment required. The Event Baseplate provides a strong and secure base yet is easy to remove, once removed, there are no large holes left in the ground and the unit can be used again and again. Because there is no need for foundations, there is no concrete required thus making this a very economic and environmentally friendly option for soft ground.
Templates are available to help positioning multi-pole installations.
Fore more information on how to use this option, please click on the button below for instructions.
If you wish to order the Baseplate only, please click on the button below to add it to your baasket.
Event Waterbase
The Event Waterbase can be used on any level surface. The black robust waterbases are easy to transport and can be filled up on site with water. Once stacked and secured together, the spigot can be positioned down the central hole providing a strong and sturdy insert for your pole to sit on. The cover which sits over the stack of bases providing a more aesthetic look. The cover can be printed with your bespoke branding if required, making it the ideal solution for your event.
The kit consists of waterbases, black cover, 2 straps and steel spigot. You need to select the correct number of bases for the pole you are intending to utilise.
The base is perfect for any outdoor event, temporary stand or occasions where your flags and pole need to be moved.
If you wish to order the Baseplate only, please click on the button below to add it to your baasket.